Ground Level Trampoline

Besides just digging a hole, how do I put my trampoline at ground level and secure?

You must first measure the diameter of the trampoline, or if its rectangular shape. Then you find a contractor to dig a hole for you. Oversize he aliitle bit. Pour concrete blocks or columns for legs. Set foot on or in the columns. As is that you must also know the distance the trampoline will span the down position to give you the distance in the soil, so it does not touch the bottom where the hole is a canoe to the trampoline. I doubt it pretty safe on both sides with other columns or blocks that can be used as points of safety. You can find clamps to secure the railroad of the tramp. AFIX and also on platelets or columns. You will need to ensure in all areas where the tramp. not tip or flip over on you.

Well .... hole, of course .... and then you have to build a frame around the perimeter to secure the frame of the trampoline. Or you could build a concrete lined hole with a concrete deck around the outside, and attach the trampoline springs in the concrete. There was the family around Fun Centers that had trampolines built into the ground like that. They have a lot of fun, but I remember there is a lot of injuries, because the area around the trampoline is not well padded with mats and protective pads.

yes you know you have to dig a hole, but the most important part is that you must complete the bottom of the hole with gravel or sand. something permeable so that water does not sit in the bottom or you have a huge mosquito problem. you can attach the ground with the same issues necessary for above ground.

Dig the hole is the best (not the easiest necessarily) solution. However, you can find a large hole in octagon random soil and use that ...
:)